Series 200 hinge for corner unit doors nickel plated

Product Information

Product Information : -

The C2AYA99 hinge is used to join/hinge two doors together in corner base or wall units allowing the doors to be at 90�. to each other in the closed position.

The hinge cup drillings for carcase/primary door and primary door/secondary door should all be on the primary door. These hinges are designed to be used in place of a piano hinge allowing for full adjustment between doors/carcase after hanging. The opening angle of the first door is 70 degrees. The maximum thickness of a door with square edges is 23mm.

You will require a back plates sold separately

General Information : -

Series 200 hinges have full three dimensional adjustment and a choice of hinge plate systems; B2 or BA instant fix snap-on. Series 200 hinges have secured the FIRA Gold Award. Bright nickel plated steel cup and arm. The series is available in various opening angles different drilling patterns and for a wide range of applications.

. Side adjustment of -1.5mm to + 4.5mm
. Height adjustment of +/- 2mm
. Depth adjustment with B2 mounting plate of + 2.8mm
. Depth adjustment with BA mounting plate of - 0.5mm to 2.8mm

Be the first to review this product!

Price: £1.67

• Tell a Friend
• Write review / comment