Slimline connector block directly connects two fittings white

Product Information
Product Information : -

The CB1 is a male/female connector block used for directly joining two slimlight fluorescent lights together.

General Information : -

The range of slimlight fluorescent lighting includes a number of available lights and connector cables which can be used under cupboards to illuminate a work surface or on top of wall units to add more light to the room.
The fluorescent lights include suppressers and are all individually switched with male connector at one end and female connector at the other. The switch is located nearest the female connector. We recommend that a competent electrician install all light fittings. Lights use 'Sylviana' warm white tubes (colour code 129).

. Slim profile only 37 mm high
. High quality epoxy coated steel cases
. All lights comply with British Standards and have the CE mark
. Modular system
. Individually switched
. Pre-wired connector fittings
. Female nearest switch
. Bulbs are ""warm white"" in colour.


WARNING: All electrical fittings must be installed by a qualified electrician. Care must be taken where lights are enclosed in a cabinet ensure there is adequate ventilation. Light fittings should not be fitted in the vicinity of flammable surfaces. Low voltage lamps must never be touched by unprotected fingers.

Be the first to review this product!

Price: £1.77

• Tell a Friend
• Write review / comment