Wire-wound transformer 100w 12v

Product Information
Product Information : -

The TW100 has a maximum loading of 105 watts and a minimum loading of 20 watts. Approximate dimensions: 89mm x 80mm x 75mm.

Wire wound transformers are a range of transformers combining the reliability of non-interference wire wound transformers with the flexibility of electronic transformers. Supplied with approx. 2m of mains lead. They do not have to be earthed.

This range of transformers can be used with dimmers as long as the dimmer is suitable for an inductive load.

These transformer are fitted with a thermal regulator switch which will shut the transformer down if it gets too hot. If this happens then the transformer should be left to cool down then switched off at the mains for 20 - 25 seconds this will re-set the regulator switch.

General Information : -

WARNING: All electrical fittings must be installed by a qualified electrician. Care must be taken where lights are enclosed in a cabinet ensure there is adequate ventilation. Light fittings should not be fitted in the vicinity of flammable surfaces. Low voltage lamps must never be touched by unprotected fingers.

Be the first to review this product!

Price: £20.91

• Tell a Friend
• Write review / comment