Glazed door 1061x497mm pre-drilled for x 3 hinges and 128mm handle left handed aluminium

Product Information
Product Information : -

Glazed aluminium door 1061mm high x 497mm wide. Pre-drilled for 3 hinges (supplied) and handle with 128mm centres. Suits LH wall unit or RH base unit.

General Information : -

This range of aluminium glazed doors offer a light and airy ambience to any contemporary kitchen design. A wide range of sizes is available to suit wall dresser top box and base applications providing a wide spectrum of design options.

The frame is 50mm at the back of the door and 9.5mm at the front offering a stepped feature. Due to the narrow frame and toughened glass each door is pre-drilled with 2 handle holes at 128mm centres. Hinge holes are predrilled 100mm from edge of the door on larger doors with 3 hinge holes the third hole is central.

The doors are also suplied with & drilled for hinges (Salice C9A6C99) with the exception of those supplied for use as drawer fronts. For backplates use Salice B2 range.

NOTES:
Wall units determine the handing of the doors. For the base unit the opposite hand needs to be ordered to ensure the handle does not reside at the bottom.

Extreme care should be taken when drilling doors (e.g. to use as drawer fronts or when using flap stays)

The handle holes are 8mm diameter to allow for the glass and frame to align. It is recommended therefore that handles with a base diameter of min. 10mm be used.

If using 2x355mm doors in a bi-folding situation consider ordering 1x door with hinge holes & 1 without. Both would have have to be used with handles.

Be the first to review this product!

Price: £121.89

• Tell a Friend
• Write review / comment