Corner door solution 715x315x18mm pair

Product Information
Product Information : -

715mm high base unit corner door solution supplied in sets of 2 doors.
The door widths vary depending on the thickness of the door:-
* 311mm for 22mm doors
* 313mm for 20mm doors
* 315mm for 18mm doors

The carcase depth required is 560mm on a 900x900mm corner situation and it is recommended that the Salice corner unit hinge C2AYA99 is used to join the 2 doors (not supplied) alternatively piano hinge can be used. This system is not suitable for wall applications.

IMPORTANT NOTE - Where necessary the internal corner edges of these doors have been cut square for this application.

With smooth understated lines Saponetta has been developed for it's visual and tactile appeal. The Italian styling with rounded and bevelled edges and a superb high gloss finish gives a sense of freshness and vitality. White high gloss vinyl door with MDF core and a wide range of accessories.

Material: Vinyl

Range options include: -
. Porthole doors with dimple glass (4mm toughened)
. Pre-glazed frame with dimple glass (4mm toughened)
. Flying shelves

Suggested co-ordinating MFC board:
Egger W908
Kronospan K101
Thermopal SE1(01)
Depalor SW112F10
Finsa 020

Aftercare:
ú Dust with a soft cloth. For product cleaning use 5% soap 95% water (liquid soap) solution wiping with a damp (not wet) cloth and finally drying with soft clean cloth.
ú Cooking splashes should be wiped up immediately using a damp cloth.
ú Do not use abrasive substances or aggressive solvents.
ú If the doors are supplied with a protective film on the face they must not be directly exposed to sunlight. It is recommended the film is removed as soon as possible.
ú Do not use bleach or other hypochlorate (chlorine) based cleaners abrasives or cleaning material on the surface of the door.

Be the first to review this product!

Price: £71.38

• Tell a Friend
• Write review / comment