Corner door solution 715x313x20mm pair

Product Information
Product Information : -

715mm high base unit corner door solution supplied in sets of 2 doors.
The door widths vary depending on the thickness of the door:-
* 311mm for 22mm doors
* 313mm for 20mm doors
* 315mm for 18mm doors

The carcase depth required is 560mm on a 900x900mm corner situation and it is recommended that the Salice corner unit hinge C2AYA99 is used to join the 2 doors (not supplied) alternatively piano hinge can be used. This system is not suitable for wall applications.

IMPORTANT NOTE - Where necessary the internal corner edges of these doors have been cut square for this application.

Tavari Walnut follows the continental trend for putting rich warm and natural timber into modern kitchen environments. Strong and defined lines of the square panel design make the door easy to accessorise while the antiqued patina adds to the depth of the Tavari timber to give a Walnut styled finish. Door frames solid timber with veneered centre panels.

Material: Timber

Tavari Walnut has been been awarded the FIRA Gold Award. The design has also been registered (reg. 2101241).

Suggested co-ordinating MFC board: -
Egger H1709
Kronospan France D722

Aftercare:
� Dust with a soft cloth following the grain pattern of the wood. For product cleaning use a 5% soap 95% water (liquid soap) solution wiping with a damp (not wet) cloth and finally drying with soft clean cloth.
� It is advisable to use a damp (not wet) cloth to remove fingerprints and marks followed at once with a clean and dry soft cloth. Cooking splashes should be wiped up immediately using a damp cloth.
� Do not use any dilutes acetone alcohol or similar products.
� Do not use bleach or other hypochlorate (chlorine) based cleaners abrasives or cleaning material on the surface of the door.

Be the first to review this product!

Price: £73.93 £48.52

• Tell a Friend
• Write review / comment